TRANSFER GS

Gozio's TRANSFER GS is built around the concept of progressive machining; the basic idea is to divide the various operations needed to complete a workpiece into relatively short operations that can be performed simultaneously rather than sequentially.

The TRANSFER GS ( vertical axis with hanging table) is capable of o­ffering maximum flexibility, efficiency,productivity, autonomy and precision in machining parts up to 5 sides in only one clamping.

From blanks or bar stock, even if they were born for medium or high volume batch sizes, thanks to modern technologies they are convenient for small batches too.

Flexibility is a bonus that CNC technology brings to TRANSFER GS; it is possible to run diff­erent part families on the machine with many setups.

Moreover, the use of quick-release toolholder spindles enables the reduction of the machine changeover time when changing production.

Gozio machines are under full CNC; each of the machining units could generate X-Y and Z-axis motion, using ballscrew actuation, and independently controlled speeds of 4,500 to 8,000 RPM are standard. Units capable of 40,000 RPM are available if the application calls for it.

TRANSFER GS can be equipped with several OPTIONS AND ACCESSORIES for maximum versatility and implementation in particularly complex applications.

Moreover, they facilitate the adaptation of the machine to future production needs.

TRANSFER MACHINE MODEL GS

Suitable for machining part up to 5 ways without move the part

Following some of the feautures available:

  • Indexing locking by three HIRTH type crowns
  • Indexing time starting from 0,6 sec.
  • up to 12 stations
  • up to 33 woking units
  • up to 11 units on the radial side
  • rotating chucks
  • rotating jaws
  • spindle stroke up to 250 mm ( up to 9.85 in )
  • spindle power up to 15 Kw ( up to 20 hp )
  • cross slides to move on X-Y axis the upper and bottom units
  • tilting bases to change the angle of the radial units
  • CNC recessing heads to perform grooving, knurling, threading and complex triaxial profiling.
  • multiple heads
  • revolving heads
  • volumetric control for clamping the workpieces in the chuck.
  • graphic/analog control of the torque curve of the motors.
  • broken tool detection system
  • tool life monitoring system.


The transfer machine complies with the international accident prevention regulations.
The same machine can be supplied in different versions and with different units according to customer's specific requirements.
Maximum level of automation and very high productivity.
Reduced tooling times.
The parts are completely machined without the need of secondary operations.

TRANSFER GS

Video

TRANSFER GS

Samples and Productivity

TRANSFER GS

Gallery
  • TRANSFER GS
    Gozio

    Transfer
  • TRANSFER GS
    Gozio

    Transfer
  • TRANSFER GS
    Gozio

    Transfer
  • TRANSFER GS
    Gozio

    Transfer
  • TRANSFER GS
    Gozio

    Transfer
  •   Via Giacomo Leopardi, 3
         25035 Ospitaletto (BS)
         ITALY
  •   0039 030 6840330
  •   0039 030 640148
  • info@goziotransfer.com